Home Gas Analyzer Indonesia Model 362 Portable O2 CO NOx Flue Gas Analyzer (NOVA)
Model 362 Portable O2 CO NOx Flue Gas Analyzer (NOVA)

In operation, a built-in sample pump draws in the flue gas sample through the S.S. probe, 12 ft. sample hose, condensate removal filter, secondary filter, flow meter, and then on to the three sensors. The detected O2, CO, and NO are displayed on separate LCD digital meters, which have a switchable backlight for use in dark areas. The analyzer can be operated for long periods unattended. The Nova 362 can also optionally indicate net stack temperature for doing fuel efficiency calculations (362T). The temperature sensor is built into the sampling probe. Efficiency charts for each fuel are provided.

The rechargeable battery provides enough power for about 16 hours of continuous operation and the analyzer canbe used while it is being recharged. A red LED indicates when to recharge and a green LED verifies that it is receiving recharging power. The battery recharger is included with the analyzer. The rugged dust-tight and water resistant case is ideal for use in harsh environments.

Analysis of oxygen (O2), carbon monoxide (CO), and oxides of nitrogen (NOx as NO). For checking combustion efficiency, air infiltration, NOx emissions, and burner & control performance of furnaces, heaters, and boilers. May be used in commercial, industrial and residential applications.

• Long life electrochemical sensors for each gas
• Rugged design that is easy to operate and maintain
• Fast warm-up and response
• Digital readout meter with backlight
• Rechargeable battery operation
• Built-in sample pump, filter, flow meter, and continuous condensate removal
• Weatherproof (WP) cabinet with clear Lexan cover
• Stainless steel probe with sample hose
• For use on any fuel
• Dual CO range: 0-2000 PPM and 0-4.00% CO
• Rapid CO & NOx reading recovery on 'overdose'
• Pays for itself in months through fuel savings

• Recorder outputs of 0-1V or 4-20 mA
• Stack temperature readout (362T)
• Special sampling probes
• Sample pre-cooler
• Suitcase (K) style cabinet available
• AC power only operation
• NOx as NO + NO2
• Detachable/portable data logger

• Air for O2 span, CO zero and NOx zero
• Analyzed mixture of CO and NO in nitrogen for CO and NO span, and O2 zero


Method of Detection: Customer replaceable electrochemical O2, CO and NO sensor.
Ranges Available: 0-25.0% O2; 0-2000 PPM and 0-4.00% CO (switch selectable),
0-200 to 0-2000 PPM NOx (as NO); 0-1800°F (0-1000°C) net stack temp (362T)
Resolution: 0.1 % O2; 1 PPM on CO and NOx
Accuracy and Repeatability: < 1% of O2; ± 10 PPM CO; ± 3 PPM NOx
Drift: ± 2% of full scale per 8 hours of continuous operation
Response Time (T-90): 10-12 seconds for O2; 20-30 seconds for CO and NOx
Ambient Temperature Range: 32° to 105°F (0°-40°C)
Linearity: ± 1% of full scale of each gas measured
Size and Weight: WP style - approx. 18" W x 12" L x 5¼" H @ 13 lbs (45 x 30 x 13 cm @ 6 kg)
K style - approx. 10 1/2" W x 14" L x 6" H @ 13 lbs (27 x 35 x 15 cm @ 6 kg)
Power: AC/DC operation, 115VAC 60Hz for recharging (Other voltages available)
Output Options: 4-20 mA or 0-1 VDC
Equipment has always been an important part, having equipment that is technologically advanced gas analyzer can make the job easier. In terms of precision gas analysis, and the accuracy of the data becomes very important, therefore we as a supplier of gas analyzer Indonesia equipment very understanding so we always give priority to products that have the precision and accuracy of the data from the gas analyzer.